How To Use This Manual - Canon WX450ST User Manual

How to Use This Manual

Thank you for purchasing a Canon projector.
The WUX450/WX520/WUX400ST/WX450ST Multimedia Projector (hereinafter
referred to as "the projector") is a high-performance projector that is capable
of projecting a high-resolution computer screen and high-quality digital
image on a large screen.
This Manual
This manual combines the user's manual for WUX450/WX520/WUX400ST/
WX450ST Multimedia Projectors. The "Operation" section (P49) describes how to
use the projector. The "Installation and Maintenance" section (P123) describes
initial setup and regular maintenance. For instructions on software for projection by
multiple projectors linked in a local network, refer to the "Networked Multi-Projection
(NMPJ)" section (P205). Read this manual thoroughly to make the most of your
projector. Installation of the projector should be performed by a qualified technician,
if possible. Contact the Canon Customer Support Center for further information.
Unless otherwise noted, figures in this manual show the WUX450/WX520.
Symbols of Button Operations
The projector can be operated using the buttons on the remote control or on the
side of the projector. The remote control allows you to operate all functions of the
projector.
In this document, the button's operations are shown as below.
Operation of buttons
on side of projector
Remote control button
operation
Symbols Used in This Manual
Meanings of the symbols used in this manual are as follows.
A precaution about operation or restriction is given here.
Indicates supplemental information to note in use.
Downloaded From projector-manual.com Canon Manuals
Selecting Screen Aspect
Select the correct aspect ratio for the screen which is used.
1
Press the MENU button to display the menu window.
Remote control Projector
2
Press the [ ] / [ ] buttons to select the [Install settings] tab.
Remote control Projector
Indicate the buttons to be pressed
2