Customizing System Operation (System Settings); Registering User Logos; Positioning User Logos - Canon WX450ST User Manual

Customizing System Operation (System Settings)

Registering User Logos

> [System settings] > [User screen
settings] >
HDMI
Digital PC
Registers the current image as a
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.
OK Display the image for logo
registration. Align the image with
the red boundary lines indicating
the portion that will be stored, and
then press the OK button. The
portion of the image within the
boundary lines is now registered.
Cancel Cancels logo registration.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Downloaded From projector-manual.com Canon Manuals
[Logo capture]
Component LAN
Analog PC USB
Positioning User
Logos
> [System settings] > [User screen
[Logo position]
settings] >
HDMI
Digital PC
Specify the position of registered
user logos as follows.
Upper L
Upper R
Indicates the display position
Center
for user logos.
Lower L
Lower R
• The factory default is [Center].
• You can specify the position after a logo has
been registered.
108
Component LAN
Analog PC USB