Selecting The Audio In Terminal; Adjusting Colors To Suit The Screen Color - Canon WX450ST User Manual

Selecting the Audio In
Terminal
> [Install settings] >
terminal select]
HDMI
Digital PC
You can select the audio in terminal
that is used for each input signal
(HDMI, Digital PC, Analog PC-1,
Analog PC-2, Component).
Off
Audio in
1
Audio in
2
HDMI
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is as follows.
HDMI [HDMI]
Digital PC [Audio in 1]
Analog PC-1 [Audio in 1]
Analog PC-2 [Audio in 2]
Component [Audio in 2]
Downloaded From projector-manual.com Canon Manuals
[Audio in
Component
Analog PC
No audio is output.
Outputs the audio signal that is
inputted in Audio in terminal 1.
Outputs the audio signal that is
inputted in Audio in terminal 2.
Outputs the HDMI audio signal.
(Only for HDMI)
Installation-Related Menu Settings
Adjusting Colors to
Suit the Screen Color
> [Install settings] >
HDMI
LAN
Digital PC
USB
You can adjust the color quality of
the images projected according to
the color of the projection screen.
Normal Select this if a standard type of
projection screen is used. The
images are projected in a light
quality similar to that of natural
light.
Greenboard Select this if a greenboard (dark
green color) is used for the
projection screen. The color quality
similar to [Normal] is obtained on
the greenboard.
Adjust Select this to make detailed
adjustment.
The following popup screen will
appear.
Press the [ ] / [ ] buttons to
select a color.
[ ] makes the color selected
darker.
[ ] makes the color selected
lighter.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Normal] is the factory default.
153
[Screen color]
Component LAN
Analog PC USB