Canon WX450ST User Manual page 308

Menu Configuration
Advanced adjustment
Ambient light (when Photo/sRGB is
selected)
Noise reduction*2
Dynamic gamma*3
Mem. color correct*4
6-axis color adjust
Fine-Tune Gamma
Iris
Lamp mode
Reset
Factory default settings are set according to the following conditions.
*2 • For HDMI (when [HDMI In] is [Auto]), the factory default is [Off].
• For Component, the factory default is [Weak].
*3 • For Analog PC-1/2, Digital PC or HDMI (when [HDMI In] is [Computer]), the factory default is
[Off].
• [Weak] by default for Component or HDMI (when [HDMI In] is [Auto]).
*4 • [Off] by default for HDMI (when [HDMI In] is [Computer]), or for Digital PC, Analog PC (1 or 2),
USB, or LAN.
• HDMI (when [HDMI In] is [Auto]) or COMPONENT: Weak
Downloaded From projector-manual.com Canon Manuals
Off*
Adjust
Type
Level
Off
Weak
Middle
Strong
Off
Weak
Middle
Strong
Flesh
Sky
Green
Off*
Adjust
Reset
P105
Off*
On
Full power*
Power saver
OK / Cancel
*: Factory defaults (setting after reset)
308
P102
Tungsten
Fluorescent
L
H
P103
P103
Off P104
Weak
Middle
Strong
P104
Hue / Saturation /
Brightness
P106
P107
P107