Canon WX450ST User Manual page 182

Completing Computer Settings
The following information is displayed.
Network Multiple Projection
Download
Projector control
Settings
Projector name
Location
MAC address
IP address
PowerStatus
LampModeFullPower
LampModePowerSaver
LampTimeConverted
FilterTime
Alert
The factory default IP address is "192.168.254.254". If DHCP settings are used, ask the
network administrator for the projector IP address. It is possible to check the IP address
from the projector menu.
3
Click [Settings] on the web screen.
The password input window appears.
4
Enter the user name and password on the password input window, then
click [OK].
The factory default user name is "root" and the password is "system".
Downloaded From projector-manual.com Canon Manuals
For downloading the Networked Multi-Projection
(NMPJ) program. (P211)
Displays the projector control screen.
Shows the settings screen.
The name of the projector on the network
The location of projector installation
The MAC address of the projector
The IP address of the projector
The power status of the projector
Lamp operating time in [Full power] lamp mode
Lamp operating time in [Power saver] lamp mode
Lamp operating time (converted value)
Air filter operating time
Error message (if an error has occurred)
Temperature abnormality
Faulty lamp
Faulty cooling fan
Faulty air filter unit
Faulty power supply
182