Specifying The Lamp Mode; Resetting Image Adjustment Settings - Canon WX450ST User Manual

Specifying the Lamp
Mode
> [Image adjustment] >
HDMI
Digital PC
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.
Full
power
Power
saver
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
Downloaded From projector-manual.com Canon Manuals
Adjusting Image Quality (Image Adjustment)
[Lamp mode]
Component
Analog PC
Projects images at full
brightness.
Reduces lamp brightness to
save energy.
Resetting Image
Adjustment Settings
> [Image adjustment] >
LAN HDMI
USB Digital PC
You can reset the current image
adjustment settings to the default
settings. If reset is performed when
user setting 1–5 is selected for
[Image mode], the settings are
returned to the settings that were
saved in [User 1–5].
OK Resets the image adjustment
settings.
Cancel Cancels resetting of the image
adjustment settings.
• Only the setting for the combination of input
signal and image mode for the current
projection is reset.
107
[Reset]
Component LAN
Analog PC USB