Specifying The Screen Aspect - Canon WX450ST User Manual

Installation-Related Menu Settings
Specifying the Screen
Aspect
> [Install settings] >
HDMI
Digital PC
Select according to the aspect ratio
of the projection screen. (P60)
16:10
16:9
4:3
16:9
D. image
shift
4:3
D. image
shift
Downloaded From projector-manual.com Canon Manuals
[Screen aspect]
Component
Analog PC
Select this when you use a
screen with an aspect ratio of
16:10.
Select this when you use a
screen with an aspect ratio of
16:9.
Select this when you use a
screen with an aspect ratio of
4:3.
Select this when you use a
screen with an aspect ratio of
16:9.
Keystone correction cannot be
performed in this mode.
However, it is possible to
move the image up / down
when projecting level.
For details about how to move
the image, refer to page
Select this when you use a
screen with an aspect ratio of
4:3.
Keystone correction cannot be
performed in this mode.
However, it is possible to
move the image left / right
when projecting level.
For details about how to move
the image, refer to page
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [16:10] is the factory default.
• Changing the screen aspect will reset any
LAN
keystone or digital image shift setting.
USB
• [Auto] may be automatically selected for the
aspect depending on the screen aspect
setting.
63.
64.
148