Plugging The Projector In - Canon WX450ST User Manual

Plugging the Projector In

Connect the power cord to the projector and plug it in.
• Fully insert the power cord plug into the socket.
• After turning off the projector, wait at least 5 minutes before turning it on again. It may
shorten the lamp life if you turn on the projector immediately after turning it off.
Unplug the power cord when the projector is not in use.
Downloaded From projector-manual.com Canon Manuals
Connect the ground terminal on the power plug to ground. Not doing so
could result in an electric shock. Additionally, it may cause computers to
be affected by electromagnetic interference and impair TV and radio
reception.
Connection Procedure
143