Step 3 Adjust the Image
Adjusting the Image Position
Turn the lens shift dials to adjust the projected image vertically or horizontally.
Called "lens shift," this adjusts the projected image into position by moving the lens
up, down, left, or right.
• Instead of adjusting where the image is projected, you can also move the image itself.
For details, refer to "Specifying Digital Image Shift" (P150).
• You can fine-tune the image position by turning the upper part of the upper lens shift
dial or the lower part of the lower lens shift dial.
■ WUX450/WX520
(2)
(3)
(1) Turning upper lens shift dial clockwise:
(2) Turning upper lens shift dial counterclockwise:
(3) Turning lower lens shift dial clockwise:
(4) Turning lower lens shift dial counterclockwise:
For details on lens shift, refer to "Lens Shift Function" (P134).
■ WUX400ST/WX450ST
(1) Turning upper lens shift dial clockwise:
(2) Turning upper lens shift dial counterclockwise:
(3) Turning lower lens shift dial clockwise:
(4) Turning lower lens shift dial counterclockwise:
For details on lens shift, refer to "Lens Shift Function" (P134).
Downloaded From projector-manual.com Canon Manuals
Vertical lens shift dial
(1)
(4)
Horizontal lens shift dial
Vertical lens shift dial
(2)
(1)
(3)
(4)
Horizontal lens shift dial
Moves the image down.
Moves the image up.
Moves the image left.
Moves the image right.
Moves the image up.
Moves the image down.
Moves the image right.
Moves the image left.
58