Reducing The Lamp Brightness (Wux4000); Resetting The Image Adjustment Settings - Canon REALiS WUX4000 Pro AV User And Installation Manual

Reducing the Lamp
Brightness
[Lamp mode]
HDMI
Digital PC
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
For the WUX4000, you can also enable or
disable this mode with the LAMP button on
the remote control.
MENU > [Image adjustment] > [Lamp mode]
Normal
Projects an image at the normal
brightness level.
Quiet
Reduces the lamp brightness and
cooling fan noise.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
Resetting the Image
Adjustment Settings
[Reset]
Component
Analog PC
You can reset the current image adjust-
ment settings to the default settings. If
reset is performed when user setting 1 - 5
is selected for [Image mode], the settings
are returned to the settings that were
saved in [User setting 1 - 5].
MENU > [Image adjustment] > [Reset]
• Only the setting for the combination of
119
Selecting an Image Quality
HDMI
Digital PC
OK
Resets the image adjustment set-
tings.
Cancel
Cancels resetting of the image
adjustment settings.
input signal and image mode for the cur-
rent projection is reset.
Component
Analog PC