Using Menus; Menu Configuration - Canon WX450ST User Manual

Using Menus

Use the menus to set the operation of the projector in detail.

Menu Configuration

The menu screen is divided into 6 tabs as shown below.
[Install settings] tab
This setting is used when installing
the projector.
[Image adjustment] tab
You can adjust the image quality
and colors according to your
preference.
[Input settings] tab
You can set the type of signal
or the method of projection of
the images input.
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which
the menu item is displayed is indicated as follows:
Input signal for which the
menu item is displayed
Input signal for which the
menu item is not displayed
Downloaded From projector-manual.com Canon Manuals
You can set the operation of the
projector.
These settings are for when using
the projector from a PC via a
network.
For the network settings, refer to
"Connecting to a Network" (P167).
Contents of menu
HDMI
Digital PC
84
[System settings] tab
[Network settings] tab
[Information] tab
You can check information
about the signal types of the
images projected and other
information.
Menu items
Component
Analog PC
LAN
USB