Canon WX450ST User Manual page 82

Split-Screen Display
3
If or
to the other side by pressing the [ ] / [ ] buttons on the remote control.
4
Press the INPUT button to select the input signal for the side with control
rights.
The [Input] menu is displayed. To determine which side is currently under
control, check the screen ID in orange in the upper right of the menu. The side
without control rights is labeled with a white circle.
For details on selecting input signals, refer to "Selecting an Input Signal" (P54).
Side currently under
control (input signal can
be switched)
To exit split-screen display, press the EXIT button on the remote control.
Downloaded From projector-manual.com Canon Manuals
is displayed in the center of the image area, you can switch control
(Example of display in split-screen mode.)
Current input signal of side
with control rights
Current input signal of side
without control rights
82