Resetting The Air Filter Counter - Canon WX450ST User Manual

Customizing System Operation (System Settings)
• The lamp counter provides an
estimate of the time remaining until
the lamp must be replaced. This
value is based on the hours in use
and the present load on the lamp.
• The number of hours indicated is
equivalent to use under these
conditions: [Vertical projection]
(P152) set to [Off], and [Lamp mode]
(P107) set to [Full power].
Downloaded From projector-manual.com Canon Manuals
Resetting the Air Filter
Counter
> [System settings] > [Other settings] >
[Air filter counter]
HDMI
Digital PC
This resets the counter which
reminds you of the time for cleaning
and replacing the air filter.
For details about how to replace or
clean the filter, refer to
To view the air filter counter, press the
OK button when [Air filter counter] is
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select
[Yes] on the confirmation screen and
press the OK button.
Press the MENU button or EXIT button.
120
Component LAN
Analog PC USB
page 199.