Showing/Hiding Input
Status
> [Install settings] > [On screen] >
[Show input status]
HDMI
Digital PC
You can select whether the signal
status is displayed on the screen
when there is no signal or when
making signal settings.
Off The input status is not displayed.
On The input status is displayed.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Downloaded From projector-manual.com Canon Manuals
Component
LAN
Analog PC
USB
Installation-Related Menu Settings
Showing/Hiding
Overheat Warnings
> [Install settings] > [On screen] >
[Overheat warning display]
HDMI
Digital PC
You can select whether or not to
display the [High temperature
warning] icon when the temperature
inside the projector has increased
and is approaching the overheat
temperature.
Off The [High temperature warning] icon is
not displayed.
On The [High temperature warning] icon is
displayed.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
When [On] is set, the [High temperature
warning] icon shown below will be
displayed when the temperature inside
the projector is abnormally high.
Screen
• [Off] is the factory default.
155
Component
LAN
Analog PC
USB