General - BOMBARDIER rally 200 Operator's Manual

GENERAL

While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious injury or death.
Unless otherwise specified, engine should not be running for all maintenance procedures.
Before performing any service or inspection operation on the vehicle, wait until the engine
and exhaust have cooled down to avoid potential burns.
Should removal of a locking device (e.g. lock tabs, self-locking fasteners, etc.) be required,
when undergoing disassembly/assembly, always replace with a new one.
The following covers the maintenance items that can be performed by the customer if desired.
Other items found in MAINTENANCE CHART must be performed by an authorized Bombardier
ATV dealer.
NOTE: Among other things, this section gives the procedures to replace the liquids. Refer to
LIQUIDS for procedures to check levels and refill.
WARNING
WARNING
WARNING
97