ENGINE
Oil Change and Oil Filter
Replacement
Oil and filter are to be replaced at the same
time. Oil change should be done with a warm
engine.
.
WARNING
The engine oil can be very hot. Wait until
engine oil is warm.
Ensure vehicle is on a level surface.
Remove dipstick.
Clean the drain plug area.
Place a drain pan under the engine drain plug
area.
Unscrew drain plug.
V06C1WY
1. Oil drain plug
98
1
Allow enough time for oil to flow out of oil filter.
Unscrew oil filter cover.
V06C04Y
Remove the oil filter and replace by a new fil-
ter.
NOTE: Check the cover O-ring, and change
it if necessary.
Wipe out any spillage on engine.
Remove oil strainer plug then clean oil strain-
er.
1
V06C1WZ
1. Oil strainer plug
To clean oil strainer, use a solvent then dry
with compressed air.
WARNING
Always wear eye protection and gloves.