Override Button
Located in front of multi-function switch.
1. Override button
This button is used to override the reverse
speed limiter system and while power backing
up. To do this, squeeze and hole the override
button then active the throttle lever. Release
the button when the maneuver is completed.
WARNING
Never activate the override button while
throttle is open as loss of control may re-
sult, causing severe personal injury or
death.
Choke Lever
Located at bottom of multifunction switch.
This device features a variable lever to ease
cold start.
Position OFF is for normal use with a warm
engine.
V06F0PY
TYPICAL — CHOKE LEVER IN THE OFF
POSITION
The full choke position is used for lower en-
gine temperature.
V06F0QY
TYPICAL — CHOKE LEVER IN THE FULL
CHOKE POSITION
The other positions between OFF and FULL
position, will be use depending on the engine
temperature.
67