Engine Coolant - BOMBARDIER rally 200 Operator's Manual

Engine Coolant

Recommended Coolant
Always use ethylene-glycol antifreeze con-
taining corrosion inhibitors specifically for in-
ternal combustion aluminum engines.
C o o l i n g s y s t e m m u s t b e f i l l e d w i t h
Bombardier premixed coolant (P/N 219 700
362) or with distilled water and antifreeze so-
lution (50% water, 50% antifreeze).
Coolant Level
WARNING
Check coolant level with engine cold. Nev-
er add coolant in cooling system when en-
gine is hot.
V06A0CY
With vehicle on a level surface, liquid should
be between MIN. and MAX. level marks of
coolant reservoir.
NOTE: When checking level at temperature
lower than 20°C (68°F), it may be slightly low-
er than MIN. mark.
76
Add coolant up to MAX. mark if required. Use
a funnel to avoid spillage. Do not overfill.
Properly reinstall and tighten filler cap.
If coolant is added in the coolant reservoir,
check the level in the radiator too. Add coolant
if necessary.
WARNING
In order to avoid potential burns, do not
remove the radiator cap if the engine is
hot.
NOTE: A cooling system that frequently re-
quires coolant is the indication of leaks or en-
g i n e p r o b l e m s . S e e a n a u t h o r i z e d
Bombardier ATV dealer.
To gain access to the radiator, proceed as fol-
lows:
– Remove bolts retaining the top and the
middle of front bumper then loosen the
lower bolts.
2
1
3
V06L0TY
1. Middle bolts
2. Upper bolts
3. Lower bolts