Headlamp Switch - BOMBARDIER rally 200 Operator's Manual

Headlamp Switch

Located on the top of multi-function switch.
Place switch to LO for the low beam and tail-
light. Place switch to HI for the high beam and
taillight.
1. Headlamp switch
2. Low beam position
3. High beam position
NOTE: Place ignition switch to ON "without
light" position to close the headlamp.
1. OFF
2. ON position "without light"
3. ON position "with light"
66
Engine Start Button
To start engine: Depress and hold the start
button. Release immediately after engine is
started.
NOTE: Engine can be stopped by turning ig-
nition key to OFF position
1. Engine start button