Mail Settings - Omron CJ1W-ETN11 Operation Manual

CPU Bus Unit System Setup
4-2-2

Mail Settings

Mail Settings
64
IP network number
130.26.0.0
Setting range: 0.0.0.0 to 255.255.255.0
A maximum of eight records can be registered. The default is for nothing to be
set.
For an explanation of how to make the settings, refer to the CX-Programmer
User's Manual.
Item
Mail settings
User-created mail data address
Local mail address
Destination mail address
SMTP server address
User Data in User Mail
Specify whether or not user data is to be added to mail contents when mail is
sent by turning ON the Mail Send Switch in the CPU Unit's I/O Memory. (Refer
to page 68.) The user data is ASCII data stored with the CPU Unit's I/O mem-
ory address set for the mail function's user-created mail data address. When
user data is sent, 1,024 bytes or the data up to the null code (00 Hex) will be
sent.
Setting
Not selected User data not included in user mail.
(Default)
Selected User data included in user mail.
Error Log in User Mail
Specify whether or not all error log information is to be added to mail contents
when mail is sent by turning ON the Mail Send Switch in the CPU Unit's I/O
Memory. (Refer to Mail Send Switch in 4-3 CIO Area Allocations.)
Setting
Not selected (Default)
Selected
Status in User Mail
Specify whether or not status information is to be added to mail contents
when mail is sent by turning ON the Mail Send Switch in the CPU Unit's I/O
Memory. (Refer to Mail Send Switch in 4-3 CIO Area Allocations.)
Setting
Not selected (Default)
Selected
Sending Mail for Errors
Specify whether or not mail is to be sent to a preset mail address whenever an
error is registered in the error log. The following types of data can be specified
to be sent as mail.
IP address of IP router
130.25.36.253
Setting range: 0.0.0.0 to 255.255.255.255
CX-Programmer default
None set.
Not set.
Not set.
Not set.
0.0.0.0 (Not set.)
Meaning
Meaning
Error log information not included in user mail.
Error log information included in user mail.
Meaning
Status information not included in user mail.
Status information included in user mail.
Section 4-2