Creating Routing Tables
Example 2: Three Interconnected Networks
This example shows the relay network table settings for three different inter-
connected networks.
Network #A
Network #B
Network #C
In the table for PC #3, for example, if network #A is taken as the end network,
then network #B becomes the relay network and node #c becomes the relay
node. If network #C is taken as the end network, then network #B still
becomes the relay network and node #e becomes the relay node.
Relay Network Table
End
No.
network
PC #1
Node #a
PC #2
Node #b
Node #c
PC #3
Node #d
PC #4
Node #e
Node #f
Node #g
Section 3-8
Relay
Node
network
49