Omron CJ1W-ETN11 Operation Manual page 172

Using Socket Services with CMND(490)
Programming Example
000000
000000 000200 A20200
000000 000200 A20200 150900
000000 000200 A20200 150900
000001
000001 000201 A20200
000001 000201 A20200 150903
000001 000201 A20200 150903
Continued on next page.
@RSET
@SET
CMND(490)
RSET
150914
SET
<>(305)
D01020
#0000
A021900
RSET
@RSET
@SET
CMND(490)
RSET
150914
SET
<>(305)
D01050
#0000
A021900
RSET
TCP Passive Open
When the TCP Open Bit (CIO 000000) turns ON, the TCP
000100
Open Error Flag (CIO 000100) is turned OFF and the TCP
Opening Flag (CIO 000200) is turned ON to initialize pro-
cessing.
000200
When the TCP Opening Flag (CIO 000200) turns ON, the
status of the Port Enabled Flag (A20200) is checked to be
D01000
sure it is ON and a PASSIVE TCP OPEN REQUEST com-
D01010
mand is sent using CMND(490).
D01000: First command word
D00000
D01010: First response word
D00000: First control data word
The TCP Opening Flag (CIO 000200) is also turned OFF.
000200
If the Port Enabled Flag (A20200) turns ON and the Open-
ing Flag (CIO 150900) turns OFF while the TCP Opening
000100
Flag (CIO 000200) is OFF, checks are made and if any of
the following are true, the TCP Open Error Flag (CIO
000100) is turned ON.
The Results Storage Error Flag (CIO 150914) is ON.
The contents of the Response Storage Area set in the
command code (D01020) is not 0000 Hex (normal end).
The Network Communications Error Flag (A21900) is ON.
After the execution results have been checked, the TCP
Open Bit (CIO 000000) is turned OFF.
000000
TCP Close
When the TCP Close Bit (CIO 000001) turns ON, the TCP
000101
Close Error Flag (CIO 000101) is turned OFF and the TCP
Closing Flag (CIO 000201) is turned ON to initialize pro-
cessing.
000201
When the TCP Closing Flag (CIO 000201) turns ON, the
status of the Port Enabled Flag (A20200) is checked to be
D01030
sure it is ON and a TCP CLOSE REQUEST command is
D01040
sent using CMND(490).
D01030: First command word
D00010
D01040: First response word
D00010: First control data word
The TCP Closing Flag (CIO 000201) is also turned OFF.
000201
If the Port Enabled Flag (A20200) turns ON and the Clos-
ing Flag (CIO 150903) turns OFF while the TCP Closing
000101
Flag (CIO 000201) is OFF, checks are made and if any of
the following are true, the TCP Close Error Flag (CIO
000101) is turned ON.
The Results Storage Error Flag (CIO 150914) is ON.
The contents of the Response Storage Area set in the
command code (D01050) is not 0000 Hex (normal end).
The Network Communications Error Flag (A21900) is ON.
After the execution results have been checked, the TCP
Close Bit (CIO 000001) is turned OFF.
000000
Section 6-3
151