Omron CJ1W-ETN11 Operation Manual page 52

Unit Components
CJ-series Ethernet Units
CJ1W-ETN11 (10Base-T)
Front
Slider
Mount to other Units.
Indicators
Display the operating status of the Unit.
ETN11
RUN ERC SD RD
ERH TCP FTP TS
Unit Number Switch
Used to set the Ethernet Unit's unit number in one
UNIT
4
digit hexadecimal.
No.
NODE
4
No.
1
x16
Node Number Switches
4
Used to set the Ethernet Unit's FINS node number
0
in two digits hexadecimal.
x16
ETHERNET
Ethernet Connector
Used to connect the Ethernet twisted-pair cable.
DIN Track Mounting Pin
Used when mounting the Unit to a DIN track.
Slider
Mount to other Units.
Note An IP address label is provided with the CJ1W-ETN11. Writing the IP address
and the subnet mask on this label and then attaching it to the front of the Unit
allows the IP address and subnet mask to be confirmed easily.
ETN11
RUN ERC SD RD
ERH TCP FTP TS
UNIT
4
No.
NODE
4
No.
1
x16
4
0
x16
IP ADDRESS
133.113. 0. 42
SUBNET MASK
255.255.255.0
ETHERNET
Example
IP ADDRESS
133.113. 0. 42
SUBNET MASK
255.255.255.0
Attach the label to the front
of the Ethernet Unit
between the node number
switches and the Ethernet
connector.
Section 3-3
31