System Configuration; Device Configuration; Node Connections - Omron CJ1W-ETN11 Operation Manual

System Configuration

1-2

System Configuration

1-2-1

Device Configuration

Workstation or personal computer
Between nodes:
Terminator
Integral multiples of 2.5 m
Transceiver
50 m max.
Transceiver cable
CS-series
CS1W-ETN01
Ethernet Unit
(10Base-5)
Controller Link network
C200HX/HG/HE PC
FA computer
1-2-2

Node Connections

Minimal Configuration: 1 Segment
CS-series PC
100 m max.
CS-series Controller Link Unit
Note 1. Transmission distance (from Terminator to Terminator):
500 meters/segment max.
2. When segments are indirectly connected by a repeater: 2.5 km/network
3. Node interval (from transceiver to transceiver): Integral multiples of 2.5 m
4. Transceiver cable length: 50 m max.
10Base-5
Node
Ethernet (10 Mbps)
500 m/segment max.
10Base-5 coaxial cable
(or 10Base-T twisted-pair cable)
CJ-series
CS-series
CJ1W-ETN11
CS1W-ETN11
Ethernet Unit
Ethernet Unit
(10Base-T)
(10Base-T)
CS-series
PC
CS-series PC
CX-Programmer
Node Node
Section 1-2
CX-Programmer
Terminator
CVM1/CV-series
PC
CJ-series
PC
CVM1/CV Ethernet Unit
(10Base-5)
10Base-T
Node
1 segment
Hub
Ground
Node
3