Fins Communications; Selecting Communications Services - Omron CJ1W-ETN11 Operation Manual

FINS Communications

2-1-3

Selecting Communications Services

To communicate with an
OMRON PC.
To communicate with a host
computer (with the FINS
gateway function enabled).
To perform operations with
an OMRON PC other than
sending or receiving data
(for example, reading or
writing files or changing the
operating mode).
To perform operations
with a host computer (with
the FINS gateway func-
tion enabled) other than
sending or receiving data
(for example, reading or
writing files or changing
the operating mode).
To communicate with a
non-OMRON PC.
To communicate with an
OMRON PC within the
socket services system.
To communicate with a host
computer (with the FINS
gateway function disabled).
To designate from the host
computer a file transfer
between the PC and the
host computer.
To send e-mail from the PC
to the mail server by any of
the required conditions.
2-2

FINS Communications

18
Refer to the following guidelines to select the appropriate communications
service to use in a given situation.
By manipulating a
dedicated control
switch.
By using CMND(490).
FINS commands can be sent to or received from other PCs or computers on
the same Ethernet network by executing SEND(090), RECV(098), or
Refer to
FINS Communications
Section 5 FINS Communications.
Socket services
(control switch manipulation)
Refer to
Section 6 Socket Services.
Socket services (CMND(490))
Refer to
FTP server
Section 7 FTP Server.
Refer to Section 8 Mail.
Mail Service
Section 2-2