Omron CJ1W-ETN11 Operation Manual page 141

Sysmac cs/cj series ethernet units
Hide thumbs Also See for CJ1W-ETN11:
Table of Contents

Advertisement

Using Socket Services with Socket Service Request Switches
TCP Socket Active Open Request
120
Response
code
004B
Error in communications with remote node (ECONNRESET).
(See note.)
004E
Remote IP address parameter error (ENETUNREACH).
(See note.)
0051
Remote IP address parameter error (EHOSTUNREACH).
(See note.)
0053
Error in communications with remote node (ETIMEDOUT) or remote
node does not exist.
0066
Internal memory cannot be obtained; cannot execute.
0080
Open request timed out.
0081
The specified socket was closed during open processing.
0082
Connection could not be established with specified remote node.
Note These response codes will be returned only on large, multilevel networks.
Response
code
0000
Normal end
0105
Local IP address setting error.
0302
CPU Unit error; cannot execute.
1100
TCP socket number is not 1 to 8 or local TCP port number is 0.
110C
Request Switch turned ON during other processing.
220F
Specified socket is already open or already processing an open
request.
2211
Unit is busy; cannot execute.
2606
Specified socket is already open as UDP socket; cannot open TCP
socket.
2607
Specified Socket Service Parameter Area is already being used for
another socket.
000D
Remote IP address parameter error (EACCES).
003E
Internal buffer cannot be obtained due to high reception traffic
(ENOBUFS).
0042
Error (EMSGSIZE).
(See note.)
0044
ICMP data received (ENOPROTOOPT).
0045
Error in communications with remote node (ECONNABORTED).
0049
The same port number has been specified more than once (EAD-
DRINUSE).
004A
Error (ECONNREFUSED) or the remote node has not been opened
as passive socket.
004B
Error in communications with remote node (ECONNRESET).
(See note.)
004C
Remote IP address parameter error (EADDRNOTAVAIL).
Wrong parameter designation.
An attempt was made to set the local TCP port of the local node to
Active Open.
004E
Remote IP address parameter error (ENETUNREACH).
The network ID is not in the IP router table or router settings are
incorrect.
0051
Remote IP address parameter error (EHOSTUNREACH).
The router settings are incorrect.
Section 6-2
Meaning
Meaning

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs1w-etn11Cs/cj seriesCs1w-etn01W343-e1-07

Table of Contents