Omron CJ1W-ETN11 Operation Manual page 192

Using FTP Commands
Function
put
Format
Function
mput
Format
Function
delete
Format
Function
mdelete
Format
Function
close
Format
Function
bye
Format
Function
quit
Format
Function
Allows the use of a wildcard character (*) to transfer multiple remote files from
the Memory Card or EM File Memory to the local host.
put file_name [DESTINATION_FILE_NAME]
Transfers the specified local file to the remote host (Memory Card or EM File
Memory).
A destination file name can be used to specify the name the file is stored
under in the Memory Card or EM File Memory.
Any existing file with the same name in the remote host (Memory Card or EM
File Memory) will be overwritten by the contents of the transferred file.
If an error occurs during file transfer, the file being transferred will be deleted
and the transmission will end in an error.
mput FILE_NAME
Allows the use of a wildcard character (*) to transfer multiple local files to the
remote host (Memory Card or EM File Memory).
Any existing file with the same name in the remote host (Memory Card or EM
File Memory) will be overwritten by the contents of the transferred file.
If an error occurs during file transfer, the file being transferred will be deleted
and the transmission of that file will end in an error. However, mput execution
will continue and remaining files will be transferred.
delete FILE_NAME
Deletes the specified remote file from the Memory Card or EM File Memory.
mdelete FILE_NAME
Allows the use of a wildcard character (*) to delete multiple remote files from
the Memory Card or EM File Memory.
close
Disconnects the Ethernet Unit's FTP server.
bye
Ends the FTP (client).
quit
Ends the FTP (client).
Section 7-5
171