Devicenet Wireless Unit; System Configuration; Features - Omron WD30-ME Operation Manual

DeviceNet Wireless Unit

1-1

DeviceNet Wireless Unit

1-1-1

System configuration

1-1-2

Features

DeviceNet slaves can be
made wireless
2
The DeviceNet wireless unit, consisting of a DeviceNet wireless master sta-
tion and a DeviceNet wireless slave station, allows wireless communication
with the DeviceNet slave.
Basically, the wireless master station is connected to the DeviceNet network
and acts as either a virtual DeviceNet slave or wireless network master station
for the DeviceNet master unit. The wireless slave station acts as either a wire-
less network slave station or a virtual DeviceNet master with the DeviceNet
slave unit.
This unit conforms to the following radio wave standards.
WD30-ME/-SE Japan: ARIB STD-T66
USA: FCC part 15.247
Canada: IC RSS 210
Europe: ETS 300 440
WD30-ME01/-SE01 Japan: ARIB STD-T66
USA: FCC part 15.247
Conformance with these standards means that the antenna can be installed
separately. The unit can be purchased as a set with a pencil antenna (WD30-
ME/-SE) or with a magnet-base antenna (WD30-ME01/-SE01). (The dia-
grams in this manual are for the WD30-ME/-SE.)
DeviceNet master unit
Wireless network
Wireless slave station
Wireless DeviceNet slaves allows for a variety of field level applications.
DeviceNet network
Wireless master
station DeviceNet cable
DC24V power
supply
Wireless slave station
Section 1-1
Configurator
DeviceNet slaves