Riso rz 590 User Manual page 38

Basic Operations
7
Check the proof copy result.
When a proof copy is printed, the Print Basic
Screen will be displayed automatically.
Check the proof copy; e.g., print position and den-
sity.
If necessary, change print position and density.
• Print Position ( p.64)
• Print Density ( p.63)
• Interval Printing ( p.67)
• Jump Wing Control ( p.69)
After adjustment, press the
proof copy.
Important!:
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry ink on the Print Cylinder (Drum).
Press the
eral times.
Note:
• You can also adjust the print position (up and
down only), the density, and the speed while
print process is in progress.
8
Enter the number of copies using the
Print Quantity Keys.
The specified number is displayed on the Print
Quantity Display.
36
Printing from a Paper Document or Book
key to print a
key to print proof copies sev-
Note:
• To change the number, press the
then re-enter the correct number.
9
Press the
The specified number of copies will be printed.
Note:
• Press the key to interrupt printing operation
currently underway.
• When printing from a computer, if the machine
is inactive for a certain period of time, it deter-
mines that the current job is completed, even if
the actual printing is still under way. If another
person accidentally initiates another job from
the computer, this will cause a new master to be
made, discarding the current one. To prevent
this from occurring, you may set a "Reserve
Period". We recommend that you activate the
"Reservation" setting when printing leaflets etc.
to prevent interruption.
p.90
key,
key.