Riso rz 590 User Manual page 150

Troubleshooting
D00-000:Installation Error (in alphabetical order)
Message
Close Front Cover
Close Master Making Unit Cover
Install Ink Cartridge
Master Making Unit has been
Unlocked
Print Cylinder has been Unlocked
Print Cylinder Not Set in Place
Press Cylinder Release Button and
Pull Out Print Cylinder
after the Button Lights
Rear Cover of Main Body is Off
Call Service
Set Master Disposal Box in Place
Set Master in Place
Set Master Making Unit in Place
Set Print Cylinder in Place
Wrong-type Ink Cartridge Installed
or Cannot Read Ink Info
Replace Ink Cartridge
or Contact dealer/Riso office
148
When a Message Displays
Possible Cause
The Front Cover is open or
improperly closed.
The Master Making Unit Cover
is open or is improperly
installed.
The Ink Cartridge is improperly
installed or is missing.
The Master Making Unit is
ready to be pulled out.
The Print Cylinder (Drum) is
ready to be pulled out.
The Print Cylinder (Drum) is
locked but not pushed in
properly.
The machine rear cover is
removed.
The Master Disposal Box is
improperly set or is missing.
No master is installed.
The Master Making Unit is
missing or is improperly
installed.
The Print Cylinder (Drum) is
improperly set or is missing.
Inappropriate Ink Cartridge is
installed.
The label on the Ink Cartridge
outlet surface has come off or
surface is with dirt.
Action
Check for the magnet underneath the
Front Cover and firmly close.
Pull out the Master Making Unit, check
and firmly close its cover.
Properly install the Ink Cartridge.
p.132
Pull out the Master Making Unit.
Pull out the Print Cylinder (Drum).
Press the Print Cylinder (Drum) Release
Button . Remove the Print Cylinder (Drum)
after the button is lit and reinstall.
Contact your dealer (or authorized service
representative).
Properly set the Master Disposal Box.
p.134
Install a Master Roll.
p.129
Properly install the Master Making Unit.
p.129
Properly install the Print Cylinder (Drum).
p.135
Properly install a correct Ink Cartridge.
p.132
Important!:
• Use the Ink Cartridge specifically
designed and approved for use with this
machine. Failure to do so may cause
problems or damage to the machine.
The label on the Ink Cartridge outlet
surface contains information needed for
printing. If the machine cannot read the
information, it does not operate.
Set an Ink Cartridge that is specific to the
machine and that is with label attachment
and free from dirt.