Riso rz 590 User Manual page 101

Display Access
Button
Image Processing
Change the default setting for the "image processing
mode".
Scanning Contrast
Change the default setting for the "scanning contrast".
Print Speed
Change the default setting for the "print speed".
Print Density
Change the default setting for the "print density".
OP Auto Process
Change the default setting for the "Auto Process" when
an optional ADF unit or Job Separator is installed.
ADF Semi-Auto
Change the default setting for the "ADF Semi-Auto"
[Default]
when the ADF unit (option) is installed.
Auto Process Mode
Change the default setting for the "Auto Process".
Job Separation
Change the default setting for the "Job Separation"
when the Job Separator (option) is installed.
Jump Wing Control
Change the default positioning of the Paper Jumping
Wing.
Important!:
• This option is available only when the special paper
setting is pre-configured. Contact your dealer (or
authorized service representative) to pre-configure
this setting.
Custom Paper Entry
Specify paper dimensions before using non-standard
sized paper.
Base IP Address
Set the IP address for connecting the machine to a
network.
IP address settings differ depending on the type of
[System]
network.
Note:
• To change an input source, touch the applicable
box, or press the
Margin-Plus Rate
Specify default size-reduction rate for the "Margin+"
setting.
Functions
key to rotate options.
Advanced Features
Description
Line/Photo/Duo (Text and
Photo)/Pencil
1, 2, 3, 4, 5, Auto
1, 2, 3 ,4 ,5
1, 2, 3 ,4 ,5
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
p.109
• When using a DHCP server
[Use DHCP]
• When entering IP address
manually
[Manual Input]
or the Print Quantity
Keys.
90 to 99 %
(Factory default is 94%)
Changing Default Settings [Admin.]
99