Area
Indicated/
Blinking
Paper is jammed in the Print Cylinder (Drum)
area.
Paper did not eject correctly.
Possible Cause
Action
1)
Pull out the Print Cylinder (Drum).
p.135
2)
Remove the jammed paper.
B
Caution:
• Be careful not to touch the separation hook
when putting your hands inside to remove
paper. The edge of the separation hook is
sharp and can cause injury.
Check for any jammed paper on the paper exit
area.
When using special paper, adjust the Paper
Arranger on the Receiving Tray Paper Guides
according to the paper characteristics.
p.31
When a Message Displays
Troubleshooting
151