Riso rz 590 User Manual page 109

In the following steps, the "Direct Access" area configuration screen is shown in the upper-left, and the "Selections"
configuration screen is shown in the bottom-right. When both screens are the same, only one image will be shown.
1
Touch [DirectAccess Entry] or
[Selections Entry] on the Admin.
screen.
2
Select a mode tab to store new but-
tons.
Setting Up Direct Access Area and Selections Tab [DirectAccess Entry] [Selections Entry]
3
Select a button to assign a function.
If the button has a function already assigned, the
newly selected function will overwrite.
4
Select a function to assign.
Note:
• Touch or
tions if necessary.
• To remove a function accidentally assigned,
touch [No Entry].
• Functions already assigned are grayed out and
not available for selection.
• Some functions display only when optional
devices are installed.
Advanced Features
to display more func-
107