Riso rz 590 User Manual page 157

Message
Original Undetected
Reset Original
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
(Continue->PROOF Key)
Processing Print Data
from PC
Linked Printers are Not
Available while Process-
ing Current Data
!!The Print Cylinder Type
has been Changed!!
Select the Current
Print Cylinder Type
Symptom/Action
(Symptom)
The machine failed to detect the original
document. The original document may
not be placed.
(Action)
Re-position the original.
(Symptom)
The printing paper is smaller than the
Master.
(Action)
Use a correct size printer paper.
(Symptom)
The printing paper is smaller than the
Master.
(Action)
Use a correct size printer paper.
(Symptom)
The machine is receiving the document
data from the computer.
While the data is being transmitted, Link
Mode printing is disabled.
(Action)
Initiate the Print job after the
transmission is complete, or print from
the machine.
(Symptom)
A different type of Print Cylinder (Drum)
has been installed.
(Action)
Select the type of Print Cylinder (Drum)
currently installed.
Alternatively, change back to the same
type of Print Cylinder (Drum) as before.
p.135
Troubleshooting
How to Clear a Pop-Up Message
Re-position the original to clear the Pop-
Up Message.
• When resuming the print job;
Touch [Continue].
(Alternatively, press the
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
• When printing from the machine;
Touch [Continue].
(You can also print by pressing the
key or the
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the key.)
• When printing from the machine;
Press the key.
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the key.)
• When printing from the machine;
Touch [Close], then either create a
master or perform printing.
• When you need to print in the Link
Mode;
Retry after the job has completed.
• When changing a setting;
In the Confirm Cylinder (Drum) Type
screen, select the type of Print
Cylinder (Drum) currently installed
and touch [OK].
• When installing a different Print
Cylinder (Drum);
Pull out the Print Cylinder (Drum) and
replace with the same one as before.
When the Print Cylinder (Drum) is re-
installed, the Warning Message will
clear.
When a Message Displays
key to print.)
key or
key.)
155