Riso rz 590 User Manual page 36

Basic Operations
4
Place the original.
Place the original on the Stage Glass or in the
optional ADF (Auto Document Feeder) unit.
When placing on the Stage Glass
Place the original face down on Stage Glass.
Align center on the top edge, and close Stage
Cover.
Magazines, books, scrap books, etc. should be
placed on Stage Glass.
When placing in the ADF unit
(Option)
Use the ADF unit if you are printing multiple
originals in succession. Place originals face-
down and then adjust the ADF Original Guides
to the width of the originals. Insert the originals
as far into the ADF unit as possible.
Important!:
• The ADF unit can accommodate originals of
" × 5 " (90 mm × 140 mm) and above.
3 / /
9 1
16 2
Smaller originals should be placed on the Stage
Glass.
• Do not place multiple originals of differing sizes
or otherwise unsuitable originals into the ADF
unit.
Doing so can cause paper jams and damage
the machine.
p.12
• Once the original is placed into the ADF unit,
"Auto Process" setting is turned ON. Press the
key to turn it OFF.
Default "Auto Process" setting for the ADF unit
can be changed on the Admin. screen.
p.99
34
Printing from a Paper Document or Book
Note:
• Up to 50 sheets of 17-lb bond (64 g/m
can be placed in the ADF unit.
• To print a proof copy after each master-making
process, select [ADF Semi-Auto].
p.95
5
Configure print functions.
In the Master Making Basic Screen, select func-
tions as needed.
Note:
• The following selections are available:
Auto Process ( p.50)
Making a master and printing in one pass
Image Processing mode ( p.44)
Selecting Image Processing mode for the
document
Scanning Contrast ( p.45)
Selecting Scanning Contrast for the original
Size ( p.46)
Enlarging/Reducing the Image
Paper ( p.49)
Printing custom-sized paper
Program ( p.70)
Automatic sorting into groups
Memory ( p.81)
Storing frequently-used settings to memory
Dot Process ( p.51)
Applying Dot Process to photos
Ink Saving ( p.53)
Saving Ink when printing
) paper
2