Riso rz 590 User Manual page 129

5
Place the original.
Note:
• For information about placing the original, see
step 4, "Printing from a Paper Document or
Book".( p.34)
• To scan a single sheet of an original, place it on
the Stage Glass.
• When Duplex Printing from odd number of orig-
inals scanned in the ADF unit, the reverse side
of the last page will be blank.
6
Select Print functions as needed.
The following functions are available:
• Image Processing mode ( p.44)
• Scanning Contrast ( p.45)
• Size ( p.46)
• Paper Size ( p.49)
• Dot Process ( p.51)
• Memory ( p.81)
7
Enter the number of copies using the
Print Quantity Keys.
The number is displayed on the Print Quantity Dis-
play.
Note:
• To change the number, press the
then re-enter the correct number.
8
Press the
The next steps are different, depending on
whether the original is scanned from Stage Glass,
or from the ADF unit.
Perform one of the following steps:
key,
key.
When using a Linked Printer (sold separately)
Important!:
• Either Stage Glass or ADF unit may be used,
but not both at a time.
Using the Stage Glass
Place the first original document on the Stage
Glass, wait for the message "Duplex Process-
ing for Linked Printer" to disappear, then place
the second original and press the
Once data for both sides of the paper is trans-
mitted, the Linked Printer will print the specified
number of copies.
To print multiple Duplex Print copies, repeat
steps 5-7 of Duplex Printing.
Important!:
• Once the first original is scanned, the next orig-
inal must be placed within pre-determined
Duplex Interval period on the Admin. screen
( p.102). Failure to do so will result in the
Linked Printer printing one side only.
Note:
• Pressing the key without placing the sec-
ond original will also result in the Linked Printer
printing one side only.
• Setting adjustment can be made on the follow-
ing functions after placing the second original
and before its scan starts:
– Image Processing mode ( p.44)
– Scanning Density ( p.45)
– Size ( p.46)
Using the ADF unit
The top sheet is scanned first.
As each original page is scanned, the Linked
Printer prints specified number of copies.
Duplex Printing [Duplex]
key.
127