Maintenance Chart - Can-Am MAX 400 EFI Operator's Manual

MAINTENANCE CHART

The maintenance is very important, if you are not familiar with safe service prac-
tices and adjustment procedures, see your authorized Can-Am dealer.
C: CLEAN
I: INSPECT AND ADJUST
AS REQUIRED
L: LUBRICATE
R: REPLACE
PART/TASK
ENGINE
Oil and filter
Valves
Condition of seals
Mounting fasteners
Air filter
(2)
Exhaust system
Muffler spark arrester
Engine coolant
Radiator cap/cooling system
pressure test
Radiator condition/cleanliness
Rewind starter rope condition
ENGINE MANAGEMENT SYSTEM
EMS sensors
EMS fault code reading
_____________________
112
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 300 km (185 mi)
(To be performed by an authorized Can-Am dealer. The initial maintenance is very
important and must not be neglected.)
25 H OR 750 km (470 mi)
50 H OR 1500 km (930 mi)
100 H OR 1 YEAR OR 3000 km (1865 mi)
R R
I I
I I
I I
C R
I I
C
I
I
(1)
I
(2) I I
I
I I
I I
200 H OR 2 YEARS OR 6000 km (3730 mi)
TO BE PERFORMED BY
Customer
Dealer
Dealer
Dealer
Customer
(1) Every 100 hours, check
coolant strength.
Dealer
(2) More often under severe use
Customer
such dusty area, sand, snow,
wet or muddy conditions.
R Customer
I Dealer
Customer
Dealer
Dealer
Dealer
LEGEND
—