Can-Am MAX 400 EFI Operator's Manual page 115

C: CLEAN
I: INSPECT AND ADJUST
AS REQUIRED
L: LUBRICATE
R: REPLACE
PART/TASK
FUEL SYSTEM
Throttle body
Throttle cable
Fuel lines, connections and fuel tank
pressure test
In-line fuel filter
Fuel pump pressure test
ELECTRICAL SYSTEM
Spark plug
(3)
Battery connections
ECM connectors
(visual inspection without
disconnecting)
Electrical connections and fastening
(ignition system, starting system,
fuel injectors etc.)
Condition of ignition switch,
engine start button and engine stop
switch
Condition of lighting system
(HI/LO intensity, brake lamp,
headlamp aiming, etc.)
Winch
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 300 km (185 mi)
(To be performed by an authorized Can-Am dealer. The initial maintenance is very
important and must not be neglected.)
25 H OR 750 km (470 mi)
50 H OR 1500 km (930 mi)
100 H OR 1 YEAR OR 3000 km (1865 mi)
200 H OR 2 YEARS OR 6000 km (3730 mi)
I,
I
L
I, I,
L L
I I
R
I
I R
I I
I
I I
I I
I I
Refer to vehicle
BASIC GUIDE
TO WINCHING
TECHNIQUES
_____________________
TO BE PERFORMED BY
Dealer
Dealer/
Customer
Dealer
Dealer
Dealer
Customer
Customer
Dealer
Dealer
(3) Make sure the spark plug is
correctly gapped.
Customer
Customer
Customer
LEGEND
—
113