Avaya 9608 Administrator's Manual page 93

Parameter Name
EXTEND_RINGTONE
FAILBACK_POLICY
FAILED_SESSION_
REMOVAL_TIMER
FAST_RESPONSE_
TIMEOUT
G726_PAYLOAD_TYPE
GMTOFFSET
GROUP
Administering options for the 9608, 9611G, 9621G, and 9641G SIP Deskphones
Default
Value
" " (Null)
"auto"
30
4
110
0:00
0
Description and Value Range
Represents a list of xml files, each representing
custom ring tone information. Alternate ring tones
to replace the standard Avaya ring tones. As of
SIP software Release 2.4, Korean ring tones are
available as is the ability to specify custom ring
tones, as described in
string up to 1023 characters containing up to 8
alternate ring tones in the format Ringtone1.xml,
Ringtone2.xml, or KoreanRT1.xml,
KoreanRT2.xml, etc.
The policy in effect for recovery from Failover.
Valid values are:
"admin" = If set to admin, the phone waits for
administrative intervention before attempting to
failback to a higher priority controller.
"auto" = If set to auto, the phone periodically
checks the availability of the primary controller and
fails back to it if it is available.
Note: If set via the settings file this value is given a
precedence of 4. If set via PPM in the
ListOfMaintenanceData element of the
getAllEndpointConfigurationResponse this value is
given a precedence of 5.
Timer to automatically remove a failed call
session. Range in seconds is 5 to 999.
The value of the Fast Response Timer for Failover.
Valid values are: 0 - 32 (seconds).
Note: If set via the settings file this value is given a
precedence of 4. If set via PPM in the
ListOfMaintenanceData element of the
getAllEndpointConfigurationResponse this value is
given a precedence of 5.
RTP dynamic payload used for G.726. Range is 96
to 127.
Offset used to calculate time from GMT reference
time. Default string length positive or negative
number of hours and minutes less than 13 hours.
Consists of 1 to 6 characters, optionally beginning
with "+" or "-", followed by one or two number
digits whose combined value is from "0" to "12"
optionally followed by a ":" and two numeric digits
whose combined value is from "00" to "59".
Specific user group as tested in configuration files.
Valid values are 0 to 999.
Customizing ring tones. A
11 of 30
Issue 1 May 2011 93