Avaya 9608 Administrator's Manual page 124

Administering Telephone Options
System
Parameter Name
VLAN_IN_USE,
L2QSIG,
DSCPSIG
SIP_CONTROLL
ER_LIST
TLSSRVR and
HTTPSRVR
L2Q
POE_CONS_
SUPPORT
124 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
TLV
Name
TIA LLDP MED
Network Policy
(Voice Signaling)
Proprietary Call
Server TLV
Proprietary File
Server TLV
Proprietary 802.1
Q Framing
Proprietary - PoE
Conservation Level
Request TLV
Impact
VLAN_IN_USE - set to the VLAN ID in the TLV.
If the Layer 2 Priority value in the TLV is not zero,
and if the Application Type is 2 (Voice Signaling),
L2QSIG is set to the Layer 2 Priority value in the
TLV.
If the DSCP value in the TLV is not zero, and if the
Application Type is 2 (Voice Signaling), DSCPSIG is
set to the DSCP value in the TLV.
This TLV is ignored if:
the value of USE_DHCP is "0" and the value
●
of IPADD is not "0.0.0.0", or
the Application Type is not 1 (Voice) or 2
●
(Voice Signaling), or
the Unknown Policy Flag (U) is set to 1.
●
SIP_CONTROLLER_LIST will be set to the IP
Address(es) in this TLV value.
TLSSRVR and HTTPSRVR will be set to the IP
Address(es) in this TLV value.
If TLV = 1, L2Q set to "1" (On). If TLV = 2, L2Q set
to "2" (Off). If TLV = 3, L2Q set to "0" (Auto). A
check is made as to whether a reset is necessary to
obtain a new IP address due to a change in the
values of the parameters L2Q or L2QVLAN.
This TLV is ignored if:
the value of USE_DHCP is "0" and the value
●
of IPADD is not "0.0.0.0", or
the current L2QVLAN value was set by an
●
IEEE 802.1 VLAN
the current L2QVLAN value was set by a
●
LLDP MED Network Policy (Voice)
If the value of POE_CONS_SUPPORT is "1",
POE_CONS_MODE is set to the level requested in
the TLV.
Name, or
TLV.
TIA