Avaya 9608 Administrator's Manual page 101

Parameter Name
PHY2STAT
PHY2VLAN
POE_CONS_SUPPORT
PRESENCE_SERVER
Administering options for the 9608, 9611G, 9621G, and 9641G SIP Deskphones
Default
Value
1
0
1
" " (Null)
Description and Value Range
Secondary Ethernet interface setting
(0=Secondary Ethernet interface off/disabled,
1=auto-negotiate, 2=10Mbps half-duplex,
3=10Mbps full-duplex, 4=100Mbps half-duplex,
5=100Mbps full-duplex), and, for post-Release
S1.0 use, 6=1000Mbps full-duplex (if supported by
the hardware). Speed and duplex issues are
summarized and the best practice is provided in
the Avaya Application Solutions: IP Telephony
Deployment Guide, Document Number
555-245-600 Issue 6, January 2008 on page 290.
This document is available from the Avaya support
website.
VLAN identifier used by frames received on or
forwarded to the secondary Ethernet interface. Set
this parameter only when VLAN separation is "1"
(enabled). Value is 1-4 ASCII numeric digits from
"0" to "4094." Null is not a valid value, nor can the
value contain spaces.
Flag to activate Power over Ethernet conservation
mode. Valid values are:
0 = the deskphone does not support power
conservation mode.
1 = the deskphone indicates support of power
conservation mode by transmission of LLDP
frames with appropriate indication in Avaya/
Extreme proprietary PoE Conservation Support
Level TLV. The deskphone supports power
conservation mode, if requested by reception of an
LLDP frame with Avaya/Extreme proprietary PoE
Conservation Level Request.
0 to 255 characters: one IP address in dotted
decimal or DNS name format, with an optional port
(separated from the address by a colon).
Used to access a server for presence indications.
In some environments the address of the SIP
proxy/registrar may be different than the presence
server. In this case the presence server is set via
this parameter. If both addresses are the same, it
is not necessary to set PRESENCE_SERVER
(shall remain null).
19 of 30
Issue 1 May 2011 101