Administering The Ip Interface And Addresses; Administering Communication Manager For Session Manager - Avaya 9608 Administrator's Manual

Administering Feature Access Codes (FACs) on the Feature Access Code screen.
●
Administering the ARS Digit Analysis Table on the ARS Digit Analysis Table screen.
●
Administering the Route Pattern on the Route Pattern screen.
●
Adding the Route Pattern to the Numbering - Public/Unknown Numbering screen.
●
Administering the Proxy Selection Route Pattern on the Locations screen.
●
Allowing the system to identify the location of a caller who dials a 911 emergency call from
●
a SIP endpoint on the IP Network Map screen.
The Administrator Guide for Avaya Communication Manager (Document Number 03-300509)
provides detailed instructions for administering an IP telephone system on Avaya
Communication Manager. See Chapter 3 "Managing Telephones," which describes the process
of adding new telephones. Also, you can locate pertinent screen illustrations and field
descriptions in Chapter 19 "Screen References" of that guide. You can find this document on
the Avaya support Web site.

Administering the IP interface and addresses

Follow these general guidelines:
Define the IP interfaces for each C-LAN and Media processor circuit pack on the switch
●
using the IP Interfaces screen. For more information, see Administration for Network
Connectivity for Avaya Communication Manager (Document 555-233-504).
On the Customer Options form, verify that the IP Stations field is set to "y" (Yes). If it is not,
●
contact your Avaya sales representative.
Administering Communication Manager for Session
Manager
For information about CM administrative requirements with Session Manager, see the Avaya
®
Aura Session Manager and Avaya Aura
support site, as described in
(SES), Session Manager, and System Manager

Administering Communication Manager for Session Manager

®
System Manager document libraries on the Avaya
Chapter 5: Administering Avaya Aura
(SM).
®
SIP Enablement Services
Issue 1 May 2011 49