Dsc Set Mode - Icom IC-M604A Instruction Manual

■ DSC Set mode

D Add Individual ID/Group ID
D Delete Individual ID/Group ID
D MMSI Code Check
The programmed 9 digit MMSI (DSC self ID) code can be
checked in the DSC Set mode.
q Enter "MMSI Check" in the DSC Set up menu.
DSC Menu ➪ Set up ➪ MMSI Check
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Check the 9 digit MMSI (DSC self ID) code.
&5% /GPW
//5+ %JGEM

%.4 'ZKV
e Push [CLR] to return to the DSC Set up menu.
r Push [CLR] or rotate [SELECTOR] to select "Exit,"
then push [ENT] to return to the DSC menu.
• Push [ENT] again to return to the normal operating mode.
D Automatic Acknowledgement
(See pages 16, 17)
This item sets the automatic acknowledgement function to
(See page 17)
ON or OFF.
When a position request, position report or polling request
call is received, the transceiver automatically transmits a
position request reply, position report reply or polling reply
call, respectively.
q Enter "Position Auto ACK" in the DSC menu.
w Rotate [SELECTOR] to turn the automatic
e Push [ENT] to return to the DSC Set up menu.
r Push [CLR] or rotate [SELECTOR] to select "Exit,"
DSC Menu ➪ Set up ➪ Position Auto ACK
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
acknowledgement function ON or OFF.
&5% /GPW
2QUKVKQP #WVQ #%-
10
1((
%.4 'ZKV  '06 1-
then push [ENT] to return to the DSC menu.
Push [ENT]
• again to return to the normal operating mode.
6
DSC OPERATION
6
41