I Dsc Set Mode - Icom IC-M502 Instruction Manual

6
DSC OPERATION

I DSC set mode

Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select "Set-up" and push
[DSC/ENT].
e Rotate the channel selector to select 'Offset time,' then
push [DSC/ENT].
26
r Set the offset time from the UTC (Universal Time Coordi-
nated) time, then push [DSC/ENT].
• Rotate the channel selector to select the number, '+' or '–.'
• Push [CH/WX] to advance the cursor.
• Push [SCAN] to move the cursor backward.
• Push [HI/LO] to cancel and exit the condition.
t Push [DSC/ENT] to program and to exit the condition.