Table of Contents
Advertisement
D Transmitting a Position Report Call
Transmit a Position Report Call when you want to announce
your own position to a specific ship and receive an answer back.
q Enter "Position Report" in the DSC menu.
DSC Menu
➪
Position Report
(Push [MENU])
(Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired preset individual
address or "Manual Input," then push [ENT].
• The ID code can be set first. (p. 16)
• When "Manual Input" is selected, push the keypad keys to
set the 9 digit MMSI number for the individual you wish to call.
&5% /GPW
5GNGEV #FFTGUU
/CPWCN +PRWV
,QJP
2CWN
)GQTIG
%.4 'ZKV '06 1-
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is
connected, next steps e and r (Current position/time
programming) are not displayed. Go to step t.
e The position information is displayed. Edit your position data
(latitude and longitude) by pushing the keypad keys. (p. 18)
r After editing the position data, then push [ENT] to set.
Then set the current UTC time directly with the keypad,
then push [ENT].
&5% /GPW
2QUKVKQP 4GRQTV 4GCF[
%.4 'ZKV '06 1-
t Push [ENT] to transmit the Position Report Call.
• If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
y After the Position Report Call has been transmitted, the
following message is displayed.
2QUKVKQP 4GRQTV
6: %QORNGVG
%.4 'ZKV
u Push [CLR] to return to the previous screen before you
entered the DSC menu.
• Even if [CLR] has not been pushed, the display automatically
returns to the previous screen after 2 seconds of inactivity.
6
DSC OPERATION
6
29
Advertisement
Table of Contents
