D Transmitting A Position Request Call - Icom IC-M604A Instruction Manual

6
DSC OPERATION
■ Transmitting DSC Calls (Continued)

D Transmitting a Position Request Call

Transmit a Position Request Call when you want to know a
specific ship's current position.
q Enter "Position Request" in the DSC menu.
DSC Menu
(Push [MENU])
w Rotate [SELECTOR] to select the desired preset individual
address or "Manual Input," then push [ENT].
• The ID code can be set first. (p. 16)
• When "Manual Input" is selected, push the keypad keys to
set the 9 digit MMSI number for the individual you wish to call.
5GNGEV #FFTGUU
/CPWCN +PRWV
,QJP
2CWN
)GQTIG
%.4 'ZKV  '06 1-
%.4 'ZKV  '06 1-
e Push [ENT] to transmit the Position Request Call.
• If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
28
➪ Position Request
(Rotate [SELECTOR], then push [ENT].)
&5% /GPW
&5% /GPW
215 4GSWGUV 4GCF[
r After the Position Request Call has been transmitted, the
following message is displayed.
2QUKVKQP 4GSWGUV
6: %QORNGVG
0QY 9CKVKPI HQT #%-
%.4 'ZKV
t Push [CLR] to return to the previous screen before you
entered the DSC menu.
• Even if [CLR] has not been pushed, the display automatically
returns to the previous screen after 2 seconds of inactivity.