I Dsc Set Mode - Icom IC-M421 Instruction Manual

I DSC Set mode

D D MMSI code check
(See p. 15 for detail)
D D Add Address ID
(See p. 16 for detail)
D D Delete Address ID
(See p. 17 for detail)
D D Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [MENU] to enter the DSC menu.
w Push [L] or [M] to select "Set up," and push [ENT].
--DSC Menu--
Select Item
Polling Request
Received Calls
Distress Setting
˘Set up
e Push [L] or [M] to select "Offset Time," push [ENT].
--DSC-Menu--
Set up
Add:Group ID
DEL:INDV ID
DEL:Group ID
˘Offset Time
r Set the offset time from the UTC (Universal Time Coordi-
nated) time using [L] or [M].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the offset time data.
• Push [CLR] to cancel and exit the condition to the set up menu.
≤
≥
t Push [ENT] to program and to exit the condition to the set
≤
up menu.
The local time indication is not available when the GPS re-
≥
ceiver (sentence formatter RMC) is connected, the trans-
ceiver's display indicates UTC time only.
DSC OPERATION
--DSC Menu--
Input Offset TIme
__0:00
<CLR˘Exit / ENT˘OK>
No offset time (default)
--DSC Menu--
Input Offset TIme
-12:00
<CLR˘Exit / ENT˘OK>
12 hours
6
6
43