I Dsc Set Mode - Icom IC-M604 Instruction Manual

I DSC Set mode

D D Add Individual ID/Group ID
D D Delete Individual ID/Group ID
D D MMSI Code Check
The programmed 9-digit MMSI (DSC self ID) code can be
checked in DSC Set mode.
q Enter "
" in DSC Set up menu.
  ➪ 
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Check the 9-digit MMSI (DSC self ID) code.
e Push [CLR] to exit the condition to DSC set up menu.
r Push [CLR] or rotate [SELECTOR] to select "
push [ENT] to return to the DSC menu.
• Repeat again to return to the normal operation condition.
(See pgs. 16, 17)
(See p. 17)
 ➪  
,"
D D Automatic Acknowledgement
This item sets the automatic acknowledgement function to
ON or OFF.
When a position request, position report or polling request call
is received, the transceiver automatically transmits a position
request reply, position report reply or polling reply call, re-
spectively.
q Enter "
" in DSC menu.
  ➪ 
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to turn the automatic acknowledge-
ment function ON or OFF.
e Push [ENT] to set and to exit the condition to DSC set up
menu.
r Push [CLR] or rotate [SELECTOR] to select "
push [ENT] to return to the DSC menu.
• Repeat again to return to the normal operation condition.
6
DSC OPERATION
 ➪  
,"
6
37