I Dsc Set Mode - Icom IC-M502AW Instruction Manual

6
DSC OPERATION

I DSC Set mode

D D Add Address ID
D D Delete Address ID
D D Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push
[ [
DSC/ENT
DSC/ENT
w Rotate
[
[ CHANNEL
CHANNEL
[ ] .
[ ]
DSC/ENT DSC/ENT
Sel Item
RCV Calls
DTRS Set
˘Set up
e Rotate
[ [
CHANNEL
CHANNEL
[ ] .
[ DSC/ENT ]
DSC/ENT
Set up
Add ID
Delete ID
˘Offset Time
34
(See p.14 for detail)
(See p.15 for detail)
] to enter the DSC menu. ]
] to select "Set
]
] to select "Offset time," push ]
r Set the offset time from the UTC (Universal Time Coordi-
nated) time.
• Edit the digit of offset time by using
- Push [
- Push [
• Rotate
the first digit.
Offset Time
00:00
up," push
No offset time (default)
t Push
[
[
DSC/ENT
DSC/ENT
The local time indication is not available when a GPS re-
ceiver (sentence formatter 'RMC') is input, the trans-
ceiver's display indicates UTC time only.
[ [
CHANNEL
CHANNEL
] or [ ] for cursor movement.
[ CH/WX] CH/WX [ SCAN ]
SCAN
[ ] ] to set the offset time.
DSC/ENT
DSC/ENT
[ ] to edit or delete "-," when the cursor is on
[ ]
CHANNEL CHANNEL
] to program and to exit the DSC menu.
]
] . ]
Offset Time
-12:00
—12 hours