Position And Time Programming - Icom IC-M604A Instruction Manual

6
DSC OPERATION

■ Position and Time programming

A Distress call should include the ship's position and time
data. If no GPS is connected, your position and UTC
(Universal Time Coordinated) time should be manually
input. They are automatically included when a GPS receiver
(NMEA0183 ver. 2.0 or 3.01) is connected.
• Manual programming is disabled when a GPS receiver
(NMEA0183 ver. 2.0 or 3.01) is connected.
• Manually programmed position/time data will be held for
only 23.5 hours.
q Enter "Position Input" in the DSC menu.
DSC Menu
(Push [MENU])
w Edit your position (latitude and longitude) data by pushing
the keypad keys.
• Push [6• ] to edit N; North latitude or [7•
MNO
S; South latitude.
• Push [3• ] to edit E; East longitude or [9•
DEF
W; West longitude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the position data.
• Push [CLR] to cancel and exit the mode.
18
➪ Position Input
(Rotate [SELECTOR], then push [ENT].)
] to edit
PRS
] to edit
WXY
&5% /GPW
+PRWV 2QUKVKQP
.CVKVWFG
AA’AAAAA0
.QPIKVWFG
AA’AAAAA9
%' 0WNN &CVC
%.4 'ZKV  '06 1-
e After editing the position data, then push [ENT] to set the
position. Then edit the current UTC time by pushing the
keypad keys.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the time.
• Push [CLR] to cancel and exit the screen.
&5% /GPW
+PRWV 76% 6KOG
AA AA
%' 0WNN &CVC
%.4 'ZKV  '06 1-
r Push [ENT] to set the time and return to the DSC menu.
t Push [CLR] or rotate [SELECTOR] to select "Exit,"
then push [ENT] to return to the normal operating mode.
0WNN
0WNN
0WNN